Derailleurs

Shimano's Tiagra Rear Derailleur GS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-GS - Series: Tiagra - Cassette Compatibility: 10 - Maximum Sprocket: low sprocket: 34T / top sprocket: 12T (front double) / 20T low sprocket: 32T / top sprocket: 12T (front triple) - Minimum Sprocket: low sprocket: 28T / top sprocket: 11T (front double) / 20T low sprocket: 25T / top sprocket: 11T (front triple) - Maximum Front Difference: 16T (front double) / 20T (front triple) - Total Capacity: 39T (front double) / 41T (front triple)

Shimano's Tiagra Rear Derailleur SS (10-speed) is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: RD-4700-SS - Series: Tiagra - Cassette Compatibility: 10-speed - Maximum Sprocket: low sprocket: 28T / top sprocket: 14T - Minimum Sprocket: low sprocket: 25T / top sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 33T

The Shimano Tourney rear derailleur offers smooth shifting with SIS and HyperGlide technologies for 7-speed drivetrains. - Maximum cog size: 28t - Total capacity: 37t

Compatible with DUAL SIS index shifting, the Shimano Tourney TY front derailleur is perfect for 3x7 and 3x6 speed drivetrains. - Action: TOP SWING - Angled clamp band design - Applicable Top-Mid tooth difference: 10T - Chain line: 47.5/50mm - Chain stay angle: 66-69 - Top gear teeth: 48T - Total capacity: 20T

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t

If you're looking for a high-quality, precision-shifting, light front derailleur, you've found it in Shimano's Ultegra. It's made of cold-forged aluminum with their wide-pivot design that stops flex for smooth, fast and exact shifts, even under load. And this fine derailleur is built tough for reliability and durability, too.

Shimano's groundbreaking 6800-series front derailleur delivers a shorter stroke at the lever and substantially lighter action for lightning fast shifts with just a flick of your finger. The redesigned pull arm offers more direct tactile feedback during shifts. The derailleur support bolt creates more solid contact to the frame, stiffening the derailleur and stabilizing it for faster, smoother shifts.

Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)

Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 2 x 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 2 x 12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 45 teeth - Largest Cog: 45 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain

• Alloy cage with titanium hardware offers light and durable performance • Side-swing design better accomodates more suspension designs and an additional 15mm of tire clearance • Increased pull strength provides faster shifting • 48.8mm Chainline Top Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Bottom • Front Derailleur Clamp: E-Type • Front Derailleur Style: Topswing • Max Ring (teeth): 38 teeth Side Swing, Double • Derailleur Capacity: 10 • Double or Triple: Double • Drivetrain Speeds: 11 • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: E-Type • Front Derailleur Style: Side Swing • Max Ring (teeth): 38 teeth • Max Ring (teeth): 38 teeth Side Swing, Triple • Derailleur Capacity: 18 • Double or Triple: Triple • Drivetrain Speeds: 11 • Front Der/Shifter Compatibility: Shimano Road • Front Derailleur Cable Pull: Front Pull • Front Derailleur Clamp: E-Type • Front Derailleur Style: Side Swing • Max Ring (teeth): 40 teeth

The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Added bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Compatible cassette size: 10-51 (12-speed), 10-45 (11-speed) - Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)

SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation

The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g

Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.

SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.

One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

We understand that the gnarly line requires a lot more focus than a lap of the supermarket. That's why we packed the GX DH 1x X-HORIZON rear derailleur with World Championship-winning features and gave it a price tag that speaks more to the Wednesday Night Championships. This is a DH derailleur that is easier to shift, is incredibly precise, and keeps the unwanted noise of chain slap to a minimum, so you can concentrate on the sweet feeling of nailing your line. GX DH—Get Some. - X-ACTUATION for precise and dependable 7-speed performance - Fully compatible with the SRAM X01 DH drivetrain - X-HORIZON design that reduces shift force, ghost shifting, and cage slap - 12-tooth X-SYNC pulley wheels

SRAM's GX 2x10 rear derailleur provides incredible shifting speed and precision. Exact Actuation technology eliminates slop and shifting variation. Roller Bearing Clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with Cage Lock technology, wheel removal and installation are easier than ever.

The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. - X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - Fully compatible with all SRAM MTB 1x drivetrains - Most affordable fully featured 1x rear derailleur in the industry - Speeds: 11-speed - Weight: 322 grams - Color: Black - Compatibility: X-ACTUATION - Bearings: Steel - Cage Size: Long - Max Tooth: 42

This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel

Incredibly fast, astonishingly quiet and impressively precise—fly through all 11 gears with SRAM's Rival 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. Aluminum inner and outer cages, aluminum links, and stainless steel hardware keep the durable Rival 22 at a svelte 191 grams. Plus, SRAM's WiFLi technology delivers a wider range of gears than your standard triple, faster shifts through two chainrings and every gear on the rear cassette, all with significant weight savings.

Get it all! Awesome shifting, light weight, dependability and great racing looks are yours with SRAM's Rival Rear Derailleur. Designed specifically for 10-speed road drivetrains and constructed of cold-forged aluminum, the Rival takes advantage of SRAM's Exact Actuation Technology for perfect shifting every time.

If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.

The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included

On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included

SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.

SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

SRAM's X5 10-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

SRAM's X5 3x10 Front Derailleur is made from chrome-plated steel with a forged aluminum clamp for strength and precision. It provides crisp action for fast, smooth, and reliable shifting season in and season out.

SRAM's X5 9-Speed Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum construction keeps the weight down, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts.

SRAM's X7 Front Derailleur is stiff, light and strong. It provides crisp, precise action for fast, smooth and reliable shifting season in and season out.

When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Front Derailleur is crafted from forged aluminum and steel to ensure a ridiculously low weight, while still delivering the precision and durability SRAM is known for. Plus, this beauty has been painstakingly engineered to throw down the fastest and smoothest front gear changes you've ever experienced.

Designed with the rider in mind, the ADVENT rear derailleur packs trail-ready features into an attainable wide-range drivetrain system. The derailleur kinematics are precisely tuned to use a more direct cable path, making the shifting feel consistent across the lowest and highest gears, and everything in between. - Clutch provides stronger chain management over rough terrain - Ratchet-and-pawl clutch is easily adjustable and repairable - Direct cable routing for smooth, responsive shifting - Compatible with 11-42T 9-speed cassettes - Compatible with ADVENT shifters only

With a race-worthy weight and the right gearing for any situation, microSHIFT's top-of-the-line ADVENT X rear derailleur delivers high-end performance without high-end headaches. By using a 10-speed chain and wide range 11-48T cassette with predictable, evenly spaced gear steps, ADVENT X allows you to find the right gear even in challenging conditions. Add in microSHIFT's proprietary ratchet-and-pawl clutch, larger pulleys with taller teeth for better chain retention, and metric adjustment hardware, and you've got everything you want and nothing you don't. - Compatible with ADVENT X 10-speed drivetrains only - Compatible with standard 10-speed chains - Ratchet-and-pawl clutch provides chain security and can be turned on and off with a switch - Metric adjustment hardware - Larger pulley and taller teeth for better chain security and higher ride height

The heart of this microSHIFT Acolyte derailleur is the innovative SpringLock system. By pairing a customized linear rate high tension spring and a dual stage activation mechanism, we’ve developed a system that can provide substantial chain security when you need it and can be turned off when you don’t.  To engage the clutch, turn the engagement bolt clockwise until it clicks. There’s no way to overtighten the bolt. To disengage the clutch for wheel removal, flip the switch. It’s that simple. - Innovative SpringLock chain retention keeps chain in place over rough terrain - Direct path cable routing for smooth and responsive shifting - Compatible with 12-42T and 12-46T 8-speed cassettes - Compatible with Acolyte shifters only

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems

M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs. - Robust composite and steel construction - Compatible with Shimano 6- and 7-speed mountain and road systems - Long cage for double or triple cranksets and 32T max cassette cog - Includes frame hanger attachment for use with older frame designs

M-series rear derailleurs are designed to work with 7, 8, and 9-speed Shimano-compatible mountain and road shifters. Marvo LT rear derailleurs are built with precision rigid aluminum construction. Let these miracle workers get any bike rolling again. - Lightweight aluminum construction - Steel pulley cage for extra chain-rub durability - Compatible with Shimano 7, 8, and 9-speed mountain and road systems

Mezzo front derailleurs offer durable construction and seamless compatibility with existing systems, making repairs and upgrades easy. - Aluminum bracket, plastic body - Includes 31.8mm clamp adapter

The microSHIFT R538 front derailleur is designed for 3 x 8-speed drivetrains, and is compatible with Shimano 8-speed systems.

Full metal construction provides stiffness and durability in this Shimano 9-speed road compatible front derailleur. - Full aluminum construction - Compatible with 9-speed Shimano road drivetrains - Designed for use with 52/42/30T chainrings

R8 front derailleurs feature a cold forged aluminum body and are optimized for 7 and 8-speed chains and Shimano-compatible road shifters.

Optimized for Shimano compatible 9-speed road drivetrains, R9 front derailleurs feature metal construction and rapid shifting response. - Cold-forged aluminum body

The K-Edge Cross Chain Catcher is lightweight, robust, and specifically designed for the abuse of cyclocross. The adjustable Cross foot mounts to its own CNC sculpted lightweight clamp. K-Edge Cross Double prevents a dropped chain and the confidence to shift in any situation. Specifications - Material: 6061 T6 aluminum - Fitment: All round seat tube frames or frames with a round mounting area for the front derailleur. - Mounts below existing clamp mounted front derailleurs. - Weight: 23 grams

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

The TR12 drivetrain system is the result of an intimate development relationship with 5x DH World Cup Overall Champion, Aaron Gwin, and his personal mechanic, John Hall. From start to finish, the project spanned more than two full years of conceptualizing to achieve this high-performance design. DERAILLEUR The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys SHIFTER Ergonomics are key to Aaron, which is why he wanted something a little different. As a result, TRP engineers looked at the cable release lever's ergonomics and devised a system to move it in a linear path to mimic the motion of a rider's thumb, rather than rotating it away. This unique positioning allows for a more consistent contact patch providing overall better grip and shifting performance when the trail gets rowdy. - Shift levers designed and located for optimum performance by Aaron Gwin - New linear actuation for improved ergonomics and consistent thumb contact - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 12 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range

- 42-34-24t and 48-38-28t compatible, suitable for most Shimano 3x7/8sp drivetrains - Top swing with alloy base bracket/clamp - Dual pull design is convertible between top-pull and bottom-pull cable routing - Multi-clamp insert converts the 34.9mm clamp to fit 31.8mm and 28.6mm seat tubes - For standard 66-69 degree chainstay/seat tube angles - 143g

- Adjustable chain stabilizer - Alloy cage and links - Max rear sprocket is 50t with 1X setup & 46t with 2X - 9 speed compatible

- 2:1 actuation ratio compatible with most Shimano 3x9sp drivetrains - Aluminum and steel construction with 11-tooth pulleys barrel adjuster

Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

Shimano's Acera rear derailleur makes use of advanced designs that make it shift better and last longer. HyperGlide technology results in faster shifting, and Double Servo technology utilizes a double servo-panta mechanism that enables the rear derailleur to track perfectly to each shift and maintain an optimum distance from each sprocket. - Maximum cog size: 34t - Total capacity: 45t - Pulleys: 11t - Chain compatibility: HG 9-speed

- 7/8 speed design - Steel inner and outer links with steel chain cage - Multi-clamp to fit 28.6 – 34.9mm frames - Multi-pull design - Total gear teeth: 48 - For seattube angles between 66 - 69 degrees

Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains

Exceptional front shifting performance for large-wheel mountain bikes. Tackle trails with this Shimano CUES FD-U6000 front derailleur's smooth and quiet shifting. It is compatible with 2x11 and 2x10-speed drivetrains. - Smooth and quiet shifting on and off the trail - Provides and extra-wide range with front double - Offers wider tire clearance - Works with 48.8 - 51.8mm chainlines - 64-69 degree chainstay angle

Exceptional front shifting performance for large-wheel mountain bikes. Tackle trails with this Shimano CUES FD-U6000 front derailleur's smooth and quiet shifting. It is compatible with 2x11 and 2x10-speed drivetrains. - Smooth and quiet shifting on and off the trail - Provides and extra-wide range with front double - Offers wider tire clearance - Works with 48.8 - 51.8mm chainlines - 64-69 degree chainstay angle